| About |
|---|
| Description: Flexible PVC medical extrusion compound – TOTM Plasticised Colour: Clear and Tints Application: Extraction Resistant Tubing Specification: When extruded under appropriate conditions material expected to comply with requirements of BS2463, Freedom from Toxicity, chemical toxicity requirements of European Pharmacopoeia monograph 3.1.2 and US Pharmacopoeia biological tests for plastics. Form: Granules&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,TOTM,Nontoxicity |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | BS 2782 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature flexibility | -36 | ℃ | BS 2782 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds, 23 ℃ | 68 | BS 2782 | |
| tensile strength | 17.6 | MPa | BS 2782 |
| Tensile strain | |||
| fracture | 370 | % | BS 2782 |
| BS Softness（BSS°） | 56 | BS 2782 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 135 | °C | |
| Barrel 2 zone temperature | 145 | °C | |
| Barrel 3 zone temperature | 155 | °C | |
| Barrel 4 zone temperature | 170 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Clear42, varies with colour |
| 3. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |