| About |
|---|
| Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance, inherent flame resistance, low surface energy, and exceptional dielectric properties. Hyflon® PFA resins have been designed to retain their properties over a wide range of temperatures from cryogenic to 250-260°C (482-500°F) and are the material of choice in applications such as linings in the Chemical Process Industry, specialty cables, semiconductor industry, aerospace, and other challenging industries. Hyflon® PFA P455X is a low molecular weight, high melt flow rate multi purpose resin designed for cable extrusion and injection molding. Hyflon® PFA P455X is an ASTM D3307 – Type IV resin.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PFA |
| Material Status | Commercial: Active |
| Features | High liquidity,Flame Characteristics,High Heat Resistance,Hypocrystalline,Low molecular weight,V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.12 to 2.17 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 372℃，5.0kg | 22 to 28 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 260 | ℃ | |
| Melting temperature | 300 to 310 | ℃ | ASTM D3307 |
| Crystallization peak temperature | |||
| DSC | 279 to 289 | ℃ | DSC |
| Linear coefficient of thermal expansion | |||
| MD | 1.2E-4 to 2.0E-4 | 1/℃ | ASTM D696 |
| specific heat | |||
| 23℃ | 900 to 1100 | J/kg/℃ | DSC |
| Thermal conductivity coefficient | |||
| 40℃ | 0.20 | W/m/K | ASTM C177 |
| Crystallization heat | 25.0 to 35.0 | J/g | DSC |
| Fusion heat | 25.0 to 35.0 | J/g | DSC |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+17 | ohms | ASTM D257 |
| Volume resistivity | > 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric strength | 35 to 40 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 23 ℃，50 Hz | 2.10 | ASTM D150 | |
| 23 ℃，100 kHz | 2.10 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 23℃，50 Hz | < 5.0E-4 | ASTM D150 | |
| 23℃，100 kHz | < 5.0E-4 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| Extreme oxygen index | 95 | % | ASTM D2863 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 55 to 60 | ASTM D2240 | |
| Tensile modulus | |||
| 23℃ | 500 to 600 | MPa | ASTM D1708 |
| tensile strength | |||
| Fracture, 23 ℃ | > 22.0 | MPa | ASTM D1708 |
| Tensile strain | |||
| Fracture, 23 ℃ | > 280 | % | ASTM D1708 |
| Bending life | |||
| 300.0 µm | 1.5E+3 to 5.5E+3 | Cycles | ASTM D2176 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.039 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |