| About |
|---|
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | TPC-ET |
| Material Status | Commercial: Active |
| Features | HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | ASTM D792 | |
| Water absorption rate | |||
| 23℃，24h | 0.4 | % | ASTM D570 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 201 | ℃ | K7206-A |
| Hot deformation temperature | |||
| 0.45 MPa | 136 | ℃ | ASTM D648 |
| Embrittlement temperature | ＜-65 | ℃ | K6261 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 63 | k7215 | |
| tensile strength | |||
| yield | 22.6 | MPa | K7113-1995 |
| fracture | 32.9 | MPa | K7113-1995 |
| Tensile strain | |||
| yield | 25 | % | K7113-1995 |
| fracture | 310 | % | K7113-1995 |
| bending strength | 19.1 | MPa | ASTM D790 |
| Bending modulus | 388 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 235 | J/m | ASTM D256 |
| -20℃ | 127 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |