| About |
|---|
| Product application and characteristic: 180BYC is a barrier resin for blow molding or multilayer extrusion bottle or tube. It can be applicable to package of food, cosmetic, agricultural chemicals ,medicine ,paint thinner, etc. 180BYC is a Polyethylene / Barrier polymer mixed system.&& |
| Product Description | |
|---|---|
| Supplier | HYUNDAI EP |
| Generic | 聚烯烃，共挤薄膜用聚烯烃 |
| Material Status | Commercial: Active |
| Features | High impact resistance,Solvent resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | Internal Method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.5 | g/10min | ASTM D1238 |
| water content | 0.15 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 53.9 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 180 | % | ASTM D638 |
| Bending modulus | 1370 | MPa | ASTM D747 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 198 | ℃ | DSC |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |