Hyundai EP EL190

About
Hyundai EP EL190 is a Polybutylene Terephthalate + PET (PBT+PET) product filled with 50% glass fiber. It is available in Asia Pacific.&&

Product Description
Supplier	HYUNDAI EP
Generic	PBT+PET
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.73	g/cm³	ASTM D792
Ash Content	50	%	Internal Method

IMPACT	Nominal value	Unit
Notched impact strength of cantilever beam
-30℃	94	J/m
23℃	100	J/m

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed	218	℃
1.8 MPa, unannealed	214	℃

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	114		ASTM D785
tensile strength
yield	165	MPa	ASTM D638
Bending modulus	16100	MPa	ASTM D790
bending strength
yield	243	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.