Hyundai EP PA6 LS380

About
Hyundai EP PA6 LS380 is a Polyamide 6 (Nylon 6) product filled with 40% glassmineral. It is available in Asia Pacific. Primary characteristic: heat stabilizer.&&

Product Description
Supplier	HYUNDAI EP
Generic	PA6
Material Status	Commercial: Active
Features	Heat Stabilized
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.48	g/cm³	ASTM D1505
Shrinkage rate
MD	0.20 to 0.40	%	ASTM D955
Ash Content	40	%

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	83	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	210	℃	ASTM D648
Melting temperature	220	℃

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+13 to 1.0E+15	ohms·cm	ASTM D257
Dielectric strength	3.5	kV/mm	ASTM D149

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	120		ASTM D785
tensile strength
yield	147	MPa	ASTM D638
Tensile strain
fracture	3.0	%	ASTM D638
Bending modulus	7850	MPa	ASTM D790
bending strength	221	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.