| About |
|---|
| DESCRIPTION AND USE Silane based crosslinkable LLDPE according to “Sioplas” system Good surface smoothness and high crosslinking density High performance in processability and physical properties for wire and cable&& |
| Product Description | |
|---|---|
| Supplier | HYUNDAI EP |
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | High liquidity,Crosslinked,High Heat Resistance,High ESCR |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 7.0 | g/10min | ASTM D1238 |
| water content | 0.20 | % | Internal Method |
| The degree of cross combination | 63 | % | DIN 16892 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 20.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D638 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Black dots | 0.00 | count/g | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.5 grams |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |