ICORENE® 9042

About
ICORENE™ 9042 is a linear medium density polyethylene designed specifically for the rotational moulding of tanks and products that require an improved degree of rigidity. It is a user-friendly rigid resin with a wide processing window, and now has enhanced sintering performance providing for potential cycle time reduction while maintaining excellent overall physical properties. ICORENE™ 9042 contains an enhanced formulated UV stabilisation package. The base resin in ICORENE™ 9042 is compliant with Australian food contact requirements (AS2070:1,8) and potable (drinking) water standard AS4020. For compliance of specific colours please contact your account manager. ICORENE™ 9042 is available in the ICORENE™ Standard colour range, and custom colours on request.&&

About

ICORENE™ 9042 is a linear medium density polyethylene designed specifically for the rotational moulding of tanks and products that require an improved degree of rigidity. It is a user-friendly rigid resin with a wide processing window, and now has enhanced sintering performance providing for potential cycle time reduction while maintaining excellent overall physical properties. ICORENE™ 9042 contains an enhanced formulated UV stabilisation package. The base resin in ICORENE™ 9042 is compliant with Australian food contact requirements (AS2070:1,8) and potable (drinking) water standard AS4020. For compliance of specific colours please contact your account manager. ICORENE™ 9042 is available in the ICORENE™ Standard colour range, and custom colours on request.&&

Product Description
Generic	LMDPE
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good flexibility,High impact resistance,Quick molding cycle,Solvent resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	4.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent	> 500	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength
-40℃，3.2mm	63.0	J	ARM

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	120	℃	ASTM D1525

Supplementary information	Nominal value	Unit	Test method
UV Rating	14000	hr	ASTM 2565

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ASTM D2240
Tensile modulus	590	MPa	ASTM D638
tensile strength
yield	18.0	MPa	ASTM D638
Tensile strain
fracture	900	%	ASTM D638
Bending modulus	775	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.