| About |
|---|
| ICORENE® 9105 V0 Grey 7004 is a linear low density polyethylene containing a flame retardant additive package for use in rotational moulding applications. This grade comply with the requirements to meet UL94 V0 at 5mm thickness. ICORENE® 9105 V0 Grey 7004 is recommended for indoor applications.&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | V-0 |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | > 1.00 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| yield | 17.0 | MPa | ASTM D638 |
| fracture | 7.00 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 19 | % | ASTM D638 |
| fracture | 50 | % | ASTM D638 |
| Bending modulus | 750 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 7.0 | kJ/m² | ISO 179 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 5.00 mm | V-0 | IEC 60695-11-10 |
| Notes |
|---|
| 1. Meets UL94 V0 |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |