Idemitsu PS HT57M

About
Idemitsu PS HT57M is a General Purpose Polystyrene product. It can be processed by extrusion or injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&&

Product Description
Supplier	Idemitsu
Generic	PS (GPPS)
Material Status	Commercial: Active
Features	HB
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ISO 1183
Melt Flow Rate
200℃，5.0kg	3.2	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength	36.0	MPa	ISO 527-2
Tensile strain
fracture	36	%	ISO 527-2
Bending modulus	2270	MPa	ISO 178
bending strength	59.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	13	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	96.0	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	70	°C
Drying time	1.0 to 2.0	hr
Barrel rear temperature	180 to 210	°C
Barrel middle temperature	190 to 220	°C
Barrel front temperature	210 to 240	°C
Nozzle temperature	200 to 230	°C
Mold temperature	40 to 60	°C
Drying temperature	70	°C
Drying time	1.0 to 2.0	hr
Barrel 1 zone temperature	160 to 200	°C
Barrel 2 zone temperature	180 to 220	°C
Barrel 3 zone temperature	200 to 240	°C
Barrel 4 zone temperature	200 to 240	°C
Nozzle temperature	190 to 220	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.