| About |
|---|
| PRODUCT SERIES: 40 SERIES BMC PRODUCT DESCRIPTION: DIELECTRIC & FLAME RESISTANT Electrical applications requiring a composite material that possesses a UL Yellow card and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587.&& |
| Product Description | |
|---|---|
| Generic | 热固性聚酯 |
| Material Status | Commercial: Active |
| Features | Flame Characteristics,V-0 |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.70 to 1.90 | g/cm³ | ASTM D792 |
| Shrinkage rate | 2.0 | ASTM D1895 | |
| Shrinkage rate | 0.10 to 0.30 | % | ISO 2577 |
| Water absorption rate | |||
| 23℃，24hr | 0.10 to 0.30 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 430 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | > 260 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 11 | kV/mm | ASTM D149 |
| Arc resistance | > 180 | sec | ASTM D495 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Babbitt hardness | 30 to 50 | ASTM D2583 | |
| Tensile modulus | 13800 | MPa | ASTM D638 |
| tensile strength | 48.3 | MPa | ASTM D638 |
| Bending modulus | 13800 | MPa | ASTM D790 |
| bending strength | 124 | MPa | ASTM D790 |
| compressive strength | 159 | MPa | ASTM D695 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |