| About |
|---|
| Indorama PET 3301 B-PET is a Polyethylene Terephthalate (PET) material. It is available in Latin America for injection molding. Important attributes of Indorama PET 3301 B-PET are: Eco-Friendly/Green Clarity Copolymer Food Contact Acceptable Good Dimensional Stability Typical applications include: Containers Bottles Food Contact Applications Packaging&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good Dimensional Stability,Renewable resources,Food contact compliance,Copolymer |
| Availabilitys | Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | Internal Method |
| Apparent density | 0.90 | g/cm³ | Internal Method |
| Acetaldehyde | 0.60 | ppm | Internal Method |
| Color b | -2.00 | Internal Method | |
| Crystallinity | 53 | % | Internal Method |
| Intrinsic viscosity | 0.74 | dl/g | Internal Method |
| water content | 0.15 | % | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | < 248 | ℃ | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Chip Size | 80.0 | pcs/g | Internal Method |
| Fines | < 0.050 | % | Internal Method |
| Yellow Chips | < 9.00 | pcs/125 g | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Determined by conversion of solution viscosity to intrinsic viscosity using an empirical correlation developed by Indorama Ventures Polymers México. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |