| About |
|---|
| Indothene-HD grade 46GP009UV is a natural pipe extrusion grade of HDPE, produced by Hostalen Stirred Tank Heavy Diluent (STHD) Slurry process at IPCL’s Gandhar Complex. It possesses bimodal molecular weight distribution, which improves processability and mechanical properties of pipe. 46GP009UV is UV stabilized grade & is suitable for producing Cable ducts for Optical fibers and other general-purpose application. The grade is designed to sustain outdoor exposure of 12 months. Designation of 46GP009UV as per IS 7328-1992 is PE EL C45 T012. FOOD CONTACT APPLICATIONS: This grade meets the requirements of Indian Standard IS: 10146 on “Polyethylene for its safe use in contact with foodstuffs, pharmaceutical and drinking water”. The level of antioxidant in 46GP009UV is not more than 0.3% by mass of the resin. The antioxidants used in the grade are covered in IS: 10141.&& |
| Product Description | |
|---|---|
| Supplier | Reliance |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Food contact compliance |
| Availabilitys | Africa & Middle East ,Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.946 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，21.6kg | 23 | g/10min | ASTM D1238 |
| 190℃，5.0kg | 0.90 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10 ℃, 10% non-ionic detergent, injection molding, F50 | > 1000 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 3.20 mm, injection molding | 23.5 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| Yield, 3.20 mm, injection molding | 11 | % | ASTM D638 |
| Fracture, 3.20 mm, injection molded | 350 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 190 | °C | |
| Barrel 2 zone temperature | 200 | °C | |
| Barrel 3 zone temperature | 210 | °C | |
| Barrel 4 zone temperature | 220 | °C | |
| Nozzle temperature | 218 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |