INELEC PPCF10 - SOLIAO

About
10% CARBON FIBER REINFORCED ELECTRICALLY CONDUCTIVE POLYPROPYLENE&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Conductive
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.20 to 0.50	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	29.0	MPa	ASTM D638
Bending modulus	2760	MPa	ASTM D790
bending strength	41.4	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	190	J/m	ASTM D256
Impact strength of cantilever beam notch	320 to 430	J/m	ASTM D256

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+3 to 1.0E+7	ohms	ASTM D257

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	77	°C
Drying time	2.0 to 4.0	hr
Processing (melt) temperature	193	°C
Mold temperature	38	°C
Back pressure	0.345 to 0.689	MPa
Screw speed	40 to 70	rpm
Vent depth	0.013 to 0.025	mm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.