INEOS HDPE K46-06-185

About
INEOS HDPE K46-06-185 K46-06-185 is a natural high molecular weight, high-density copolymer polyethylene developed for automotive fuel tanks. It combines excellent processability and outstanding physical performance, particularly environmental stress crack resistance (ESCR) and impact properties. This grade’s high melt strength aids the continuous extrusion production of multi-layer tanks. See the Regulatory Position Statement (RPS) on our web site for more detailed information on regulatory compliance and substances of concern for this grade.&&INEOS HDPE K46-06-185 K46-06-185 is a natural grade of high density, high molecular weight polyethylene. It is specially designed for use in the manufacture of automotive fuel tanks. Applications All types of automotive fuel tanks Characteristics Easily mouldable into complex shapes, giving very uniform wall thickness Excellent cold impact strength Very good environmental stress crack resistance Low permeability to petrol/alcohol blends&&

About

INEOS HDPE K46-06-185 K46-06-185 is a natural high molecular weight, high-density copolymer polyethylene developed for automotive fuel tanks. It combines excellent processability and outstanding physical performance, particularly environmental stress crack resistance (ESCR) and impact properties. This grade’s high melt strength aids the continuous extrusion production of multi-layer tanks. See the Regulatory Position Statement (RPS) on our web site for more detailed information on regulatory compliance and substances of concern for this grade.&&INEOS HDPE K46-06-185 K46-06-185 is a natural grade of high density, high molecular weight polyethylene. It is specially designed for use in the manufacture of automotive fuel tanks. Applications All types of automotive fuel tanks Characteristics Easily mouldable into complex shapes, giving very uniform wall thickness Excellent cold impact strength Very good environmental stress crack resistance Low permeability to petrol/alcohol blends&&

Product Description
Supplier	INEOS
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Ethanol tolerance,High molecular weight,Good melt strength,Copolymer,High density,low-temperature impact resistance,High ESCR,Fuel resistance
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.946	g/cm³	ASTM D4883
Melt Flow Rate
190℃，21.6kg	4.2	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, molded, F50	> 1000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, molded	61		ASTM D2240
tensile strength
Fracture, molded	37.9	MPa	ASTM D638
Yield, molding	23.4	MPa	ASTM D638
Tensile strain
Fracture, molded	> 800	%	ASTM D638
Yield, molding	12	%	ASTM D638
Bending modulus			ASTM D790A
2% cut, molded	807	MPa	ASTM D790-A
Tangent, molded	1040	MPa	ASTM D790-A

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
Compression Molding	690	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed, molded	45.0	℃	ASTM D648
0.45 MPa, unannealed, molded	66.1	℃	ASTM D648
Embrittlement temperature	< -75.0	℃	ASTM D746
Vicat Softening Temp	124	℃	ASTM D1525

Notes
1. Typical properties: these are not to be construed as specifications.
2. Annealed
3. 2.0 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.