| About |
|---|
| Additive free LDPE homopolymer extrusion coating Benefits & Features 17L430 special polymer structure gives the following properties: low speed grade with a very stable and low Neck In improving the melt curtain stability in blends or coextrusion Applications Extrusion coating and laminating grade designed with an outstanding low Neck In. As blending partner with other polymers the 17L430 improves the melt curtain stability and reduces the Neck In.&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Low shrinkage,Low density,Homopolymer |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 45 | ISO 868 | |
| Tensile modulus | |||
| Compression Molding | 183 | MPa | ISO 527-2 |
| tensile strength | |||
| Fracture, molded | 13.0 | MPa | ISO 527-2 |
| Yield, molding | 9.00 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, molded | 410 | % | ISO 527-2 |
| Yield, molding | 20 | % | ISO 527-2 |
| Bending modulus | |||
| 23 ℃, molded | 220 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | |||
| -20 ℃, molded | 69 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 86.0 | ℃ | ISO 306/A50 |
| Melting temperature | 107 | ℃ | ISO 11357-3 |
| Crystallization peak temperature | |||
| DSC | 56.0 to 92.0 | ℃ | Internal Method |
| Fusion heat | 111 | J/g | ASTM D3418 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DSC 2nd heating 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |