| About |
|---|
| Additive free LDPE homopolymer extrusion coating, injection moulding and compounding product Benefits & Features 19N430 special polymer structure gives the following properties: For extrusion coating: Well balanced Neck In and Draw Down performance Good adhesion performance and sealing properties For injection moulding and compounding: Excellent flexibility Good transparency Absence of any kind of additive allowing tailor formulation of specific compounds and master-batches Applications Extrusion coating and laminating grade designed for a medium to high coating line speed. 19N430 is also suitable for injection moulding of flexible products (caps and closures, food containers, soft tubes, technical parts) as well as for the production of compounds.&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good bond,Low density,Homopolymer |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 7.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 1 second, molded | 47 | ISO 868 | |
| Tensile modulus | |||
| 23 ℃, injection molding | 170 | MPa | ISO 527-2/1BA/1 |
| tensile strength | |||
| Fracture, 23 ℃, molded | 10.0 | MPa | ISO 527-2/50 |
| Yield, 23 ℃, molded | 9.00 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| Fracture, 23 ℃, molded | 550 | % | ISO 527-2/50 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 87.0 | ℃ | ISO 306/A50 |
| Melting temperature | 108 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Processing (melt) temperature | 190 to 250 | °C | |
| Melt temperature | 280 to 325 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DSC 2nd heating 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |