| About |
|---|
| 19N930 is a low-density polyethylene intended for injection molding. It is a medium MFR material, having good flow properties and allowing short cycle time. The moulded article is characterized by low degree of built-in stress, good stiffness, low warpage and high gloss. Applications: 19N930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for products like caps and closures, household goods and toys.&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Low warping,Good flexibility,Good surface appearance,Quick molding cycle,Low density,Moderate liquidity |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ISO 1183/D |
| Melt Flow Rate | |||
| 190℃，0.325kg | 7.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 47 | ISO 868 | |
| tensile strength | |||
| Fracture, molded | 10.0 | MPa | ISO 527-2 |
| Yield, molding | 9.00 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, molded | 550 | % | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -20℃ | 75 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 88.0 | ℃ | ISO 306/A |
| Melting temperature | 108 | ℃ | DSC |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Conditioned according to ISO 1872/1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |