INEOS PP 100-CA50S

About
Benefits & Features High speed moulding Good processability High degree of cleanliness Applications 100-CA50S is a high flow rate homopolymer designed for high speed injection moulding. It offers a good balance of stiffness and flow. Thin walled containers for dairy and fresh food Food trays Houseware articles Disposables&&

Product Description
Supplier	INEOS
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,High purity,High liquidity,Quick molding cycle,Disposable,Homopolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	50	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	2.2	kJ/m²	ISO 179/A
Impact strength of cantilever beam notch
23℃	3.0	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	115	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	71		ISO 868
tensile strength
Yield, 23 ℃	36.0	MPa	ISO 527-2
Bending modulus
23℃	1550	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.