INEOS PP 102-CA03

About
102-CA03 is a fully formulated grade intended for sheet extrusion and thermoforming applications requiring improved transparency and higher stiffness than conventional polypropylene. It is nucleated and clarified and contains a low level of antistatic agent. It offers a good balance between easy flow and mechanical properties and features very good optical properties, easy de-nesting and good thermal stability of end products. Applications Transparent trays for biscuits, fruit and vegetables Containers for various food products Benefits and Features Very good optical properties High stiffness of end products Easy de-nesting Good thermal stability Easy processing in both forming and cutting&&

About

102-CA03 is a fully formulated grade intended for sheet extrusion and thermoforming applications requiring improved transparency and higher stiffness than conventional polypropylene. It is nucleated and clarified and contains a low level of antistatic agent. It offers a good balance between easy flow and mechanical properties and features very good optical properties, easy de-nesting and good thermal stability of end products. Applications Transparent trays for biscuits, fruit and vegetables Containers for various food products Benefits and Features Very good optical properties High stiffness of end products Easy de-nesting Good thermal stability Easy processing in both forming and cutting&&

Product Description
Supplier	INEOS
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good Clarity,Good liquidity,Optical performance,Nucleation,Good stripping performance,Antistatic property,Heat Stabilized,Homopolymer
Availabilitys	Europe
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	3.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	39.0	MPa	ISO 527-2
Bending modulus
23℃	1800	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	3.0	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	156	℃	ISO 306/A
Melting peak temperature	165	℃	ASTM D3417
Crystallization peak temperature
DSC	129	℃	ASTM D3417

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.