| About |
|---|
| Grade H03G-02 is a polypropylene homopolymer designed for applications that require low water carryover. Typical applications are slit tape, film, and fiber. Benefits include low die build-up and low water carryover. This grade is not cleared for food contact.&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Low water portability,Homopolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.906 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.5 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 37 | J/m | ASTM D256 |
| 23℃ | 3.70 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 102 | ℃ | ASTM D648 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60° | 94 | ASTM D2457 | |
| Haze | |||
| 1270 µm | 80 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 103 | ASTM D785 | |
| tensile strength | ASTM D638 | ||
| yield | 36.4 | MPa | ASTM D638 |
| fracture | 18.8 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 9.6 | % | ASTM D638 |
| fracture | 150 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 1630 | MPa | ASTM D790-A |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |