| About |
|---|
| T00G-00 is a fractional melt flow TPO designed for the roofing membrane market. Its blend of impact resistance and flexural modulus is designed to provide an excellent balance between processing and performance. Typical applications include roofing membranes, geomembranes, mats, and applications that require flexibility and strength. T00G-00 meets FDA requirements of 21 CFR 177.1520.&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Food contact compliance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.871 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 0.60 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 52 | ASTM D785 | |
| tensile strength | |||
| fracture | 10.8 | MPa | ASTM D638 |
| yield | 8.45 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 620 | % | ASTM D638 |
| yield | 38 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 172 | MPa | ASTM D790-A |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| Area | ASTM D256 | ||
| -20℃ | 720 | J/m | ASTM D256 |
| 23℃ | 430 | J/m | ASTM D256 |
| -20℃ | 71.0 | kJ/m² | ASTM D256 |
| 23℃ | 42.4 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 45.6 | ℃ | ASTM D648 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |