| About |
|---|
| 该材料为PC UV母粒，配合建材（阳光板，中空板，耐力板，锁扣板）PC原料一起使用 |
| Product Description | |
|---|---|
| Supplier | SAMSUNG |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | ASTM D792 | |
| Melt Flow Rate | |||
| 300℃，1.20kg | 10 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| 3.2 mm | |||
| MD | 0.4-0.6 | % | ASTMD-955 |
| TD | 0.4-0.6 | % | ASTMD-955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 50 mm/min | 67 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 50 mm/min | 96 | % | ASTM D638 |
| Tensile modulus | |||
| 50 mm/min | 2190 | MPa | ASTM D638 |
| Breaking strength | |||
| 50mm/min | 64 | MPa | ASTMD-638 |
| bending strength | |||
| 2.80 mm/min | 100 | MPa | ASTM D790 |
| Bending modulus | |||
| 2.80 mm/min | 2360 | MPa | ASTMD-790 |
| hardness | |||
| R | 119 | ASTMD-785 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa，6.4 mm | 121 | ℃ | ASTM D648 |
| 0.45 MPa，6.4 mm | 126 | ℃ | ASTM D648 |
| Vicat Softening Temp | |||
| B50 | 134 | ℃ | ISO R 306 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，6.4mm | 60 | J/m | ASTM D256 |
| 23℃，3.2mm | 80 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |