| About |
|---|
| INFUSE™ 9900 Olefin Block Copolymer is a high flow olefin elastomer. It is readily formulated for a variety of applications. Main Characteristics: High flow product General purpose elastomer&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | OBC |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.880 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 30 | g/10min | ASTM D1238 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Fracture, injection molding | 4.41 | MPa | ASTM D638 |
| fracture | 5.07 | MPa | ASTM D412 |
| Tensile strain | |||
| Fracture, injection molding | 780 | % | ASTM D638 |
| fracture | 870 | % | ASTM D412 |
| tear strength | 47.5 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 21℃ | 38 | % | ASTM D395 |
| 70℃ | 98 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 122 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw A, injection molding | 78 | ASTM D2240 | |
| Tensile modulus | |||
| 100% cut, injection molding | 4.00 | MPa | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 3. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |