| About |
|---|
| Ingeo biopolymer 2003D, a NatureWorks LLC product, is a thermoplastic resin derived from annually renewable resources and is specifically designed for use in fresh food packaging and food service ware applications. Ingeo biopolymer 2003D is a transparent general purpose extrusion grade that is used naturally or as part of a formulated blend. This is a high molecular weight biopolymer grade that processes easily on conventional extrusion equipment. Extruded roll stock is readily thermoformable. Applications Potential applications for Ingeo biopolymer 2003D include: Dairy containers Food service ware Transparent food containers Hinged-ware Cold drink cups&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Good Clarity,Renewable resources,Biodegradable,Food contact compliance,High molecular weight,Compostable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 210℃，2.16kg | 6.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Elastic modulus | |||
| MD | 3450 | MPa | ASTM D882 |
| tensile strength | |||
| MD, fracture | 53.1 | MPa | ASTM D882 |
| MD, yield | 60.0 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 6.0 | % | ASTM D882 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 16 | J/m | ASTM D256 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| transparency | Transparent |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 91 | °C | |
| Drying time | 2.0 | hr | |
| Recommended maximum moisture content | < 0.025 | % | |
| Hopper temperature | 45 | °C | |
| Barrel 1 zone temperature | 179 | °C | |
| Barrel 2 zone temperature | 191 | °C | |
| Barrel 3 zone temperature | 199 | °C | |
| Connector temperature | 199 | °C | |
| Melt temperature | 210 | °C | |
| Nozzle temperature | 191 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |