| About |
|---|
| Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. Monofilaments made with Ingeo 3D870 provide excellent 3D printing characteristics such as precise detail, good adhesion to build plates, less warping or curling, and low odor.&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Low warping,High impact resistance,Renewable resources,Low odor,Good bond,Compostable,Heat Resistance, Good |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 210℃，2.16kg | 9.0 to 15 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 2870 | MPa | |
| — | 2450 | MPa | |
| — | 2480 | MPa | |
| tensile strength | |||
| — | 40.0 | MPa | |
| — | 32.0 | MPa | |
| — | 24.0 | MPa | |
| Bending modulus | |||
| — | 2410 | MPa | |
| — | 1980 | MPa | |
| — | 2350 | MPa | |
| bending strength | |||
| — | 73.0 | MPa | |
| — | 49.0 | MPa | |
| — | 46.0 | MPa |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| — | 160 | J/m | |
| — | 120 | J/m | |
| — | 110 | J/m | |
| — | 230 | J/m | |
| — | 200 | J/m | |
| — | 64 | J/m |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 75.0 to 85.0 | ℃ | ASTM E2092 |
| Glass transition temperature | 55.0 to 60.0 | ℃ | ASTM D3418 |
| Melting peak temperature | 165 to 180 | ℃ | ASTM D3418 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Process Conditions | |||
|---|---|---|---|
| Squeeze description | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 179 | °C | |
| Barrel 2 zone temperature | 191 | °C | |
| Barrel 3 zone temperature | 199 | °C | |
| Connector temperature | 199 | °C | |
| Melt temperature | 210 | °C | |
| Nozzle temperature | 199 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ZX Axis, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 3. YX Axis, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 4. XY Axis, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 5. XY Axis, Crystalline, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 6. YX Axis, Crystalline, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 7. ZX Axis, Crystalline, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 8. XY Axis, Amorphous, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 9. YX Axis, Amorphous, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 10. ZX Axis, Amorphous, 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 11. 3D printed part, 100% in-fill, annealed at 110°C/15 min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |