| About |
|---|
| Ingeo 4043D – a product from NatureWorks LLC – can be converted into a biaxially oriented film with use temperatures up to 265°F (130°C). This film has excellent optics, good machinability and excellent twist and deadfold. These properties make 4043D film an ideal candidate for candy twist wrap and other packaging applications. Additional properties include advantageous barrier to flavor and grease and superior oil resistance.&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | High elastic,Renewable resources,Optical performance,Machinable,Retention of aroma ,Biodegradable,Food contact compliance,Compostable,Grease resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 210℃，2.16kg | 6.0 | g/10min | ASTM D1238 |
| Relative viscosity | |||
| 30℃ | 4.00 | ASTM D5225 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 3830 | MPa | ASTM D790 |
| bending strength | 82.7 | MPa | ASTM D790 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Elastic modulus | |||
| MD | 3610 | MPa | ASTM D882 |
| tensile strength | |||
| MD, fracture | 53.1 | MPa | ASTM D882 |
| MD, yield | 60.0 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 6.0 | % | ASTM D882 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 16 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 55.0 | ℃ | ASTM E2092 |
| Glass transition temperature | 55.0 to 60.0 | ℃ | ASTM D3418 |
| Crystallization peak temperature | |||
| DSC | 145 to 160 | ℃ | ASTM D3418 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 79 | °C | |
| Drying time | 4.0 | hr | |
| Recommended maximum moisture content | 0.025 | % | |
| Hopper temperature | 45 | °C | |
| Barrel 1 zone temperature | 179 | °C | |
| Barrel 2 zone temperature | 191 | °C | |
| Barrel 3 zone temperature | 199 | °C | |
| Connector temperature | 199 | °C | |
| Melt temperature | 210 | °C | |
| Nozzle temperature | 199 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |