Ingeo™ 4060D

About
Ingeo 4060D, a product from NatureWorks LLC, can be coextruded with other Ingeo resin to form a sealant layer for biaxially oriented Ingeo film. This resin has excellent heat seal and hot tack performance with a seal initiation temperature of 80°C. This sealant does not adversely affect the unique properties of Ingeo bixially oriented film such as high gloss and transparency, dead-fold or aroma and grease barrier.&&

About

Ingeo 4060D, a product from NatureWorks LLC, can be coextruded with other Ingeo resin to form a sealant layer for biaxially oriented Ingeo film. This resin has excellent heat seal and hot tack performance with a seal initiation temperature of 80°C. This sealant does not adversely affect the unique properties of Ingeo bixially oriented film such as high gloss and transparency, dead-fold or aroma and grease barrier.&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	Good surface appearance,Good heat sealing,High elastic,Renewable resources,Biodegradable,Food contact compliance,Grease resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D1505

film	Nominal value	Unit	Test method
Initial sealing temperature	80.0	℃	ASTM F88

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	55.0 to 60.0	℃	ASTM D3417

optical performance	Nominal value	Unit	Test method
gloss
20°	90		ASTM D1003
Haze	2.0	%	ASTM D1003

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	43	°C
Drying time	4.0	hr
Recommended maximum moisture content	0.025	%
Barrel 1 zone temperature	179	°C
Barrel 2 zone temperature	191	°C
Barrel 3 zone temperature	199	°C
Connector temperature	199	°C
Melt temperature	210	°C
Nozzle temperature	191	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.