Ingeo™ 6204D

About
NatureWorks® PLA polymer 6204D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6204D is designed for extrusion into mechanically drawn staple fibers or continuous filament, using conventional fiber spinning and drawing equipment. 6204D is typically well suited for fiber processes where deeper disperse dying in the final product is desired: partially orientated yarn (POY), fully drawn yarn (FDY), staple fibers, and continuous filament. NatureWorks® PLA 6204 can be converted into a broad range of fiber products. Potential applications for PLA polymer 6204D include: Woven and knitted 100% continuous filament apparel Woven and knitted, intimate staple blend fabrics including blends with cotton, wool, and other fibers Woven and knitted fabrics and netting for civil engineering applications Home furnishings&&

About

NatureWorks® PLA polymer 6204D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6204D is designed for extrusion into mechanically drawn staple fibers or continuous filament, using conventional fiber spinning and drawing equipment. 6204D is typically well suited for fiber processes where deeper disperse dying in the final product is desired: partially orientated yarn (POY), fully drawn yarn (FDY), staple fibers, and continuous filament. NatureWorks® PLA 6204 can be converted into a broad range of fiber products. Potential applications for PLA polymer 6204D include: Woven and knitted 100% continuous filament apparel Woven and knitted, intimate staple blend fabrics including blends with cotton, wool, and other fibers Woven and knitted fabrics and netting for civil engineering applications Home furnishings&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable,Food contact compliance,Compostable
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Elastic modulus	30.0 to 40.0	g/denier	ASTM D2256

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	55.0 to 60.0	℃	ASTM D3417
Crystallization peak temperature
DSC	155 to 170	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
Denier（per filament）	> 0.500
Elongation of Fibers	10 to 70	%	ASTM D2256
Tenacity of Fibers	2.50 to 5.00	g/denier	ASTM D2256

PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D792
Melt Flow Rate
210℃，2.16kg	15-30	g/10min	ASTM D1238
Shrinkage rate			ASTM D2102
Boiled water	5.0-15	%
Hot air: 130 ℃, 10 minutes	5.0-15	%
Relative viscosity	3.10		Internal Method
Melt density
230℃	1.08	g/cm³

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	80.0	°C
Drying time	4.0 to 6.0	hr
Recommended maximum moisture content	< 5.0E-3	%
Melt temperature	220 to 240	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.