Ingeo™ 6302D

About
NatureWorks® PLA polymer 6302D, a NatureWorks LLC product, is an amorphous thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6302D is designed for extrusion into mechanically drawn staple fibers using conventional fiber spinning and drawing equipment. NatureWorks® PLA 6302D can be used as a low melt binder polymer in a sheath-core configuration. Potential applications for PLA polymer 6302D include: Thermal bonded nonwovens&&

About

NatureWorks® PLA polymer 6302D, a NatureWorks LLC product, is an amorphous thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6302D is designed for extrusion into mechanically drawn staple fibers using conventional fiber spinning and drawing equipment. NatureWorks® PLA 6302D can be used as a low melt binder polymer in a sheath-core configuration. Potential applications for PLA polymer 6302D include: Thermal bonded nonwovens&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable,Food contact compliance,Compostable
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Glass transition temperature	55.0 to 60.0	℃	ASTM D3417
Crystallization peak temperature
DSC	125 to 135	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
Denier（per filament）	> 4.00
Elongation of Fibers	50	%	ASTM D2256
Tenacity of Fibers	3.50	g/denier	ASTM D2256

PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D792
Melt Flow Rate
210℃，2.16kg	15 to 20	g/10min	ASTM D1238
Relative viscosity	3.00		Internal Method
Melt density
230℃	1.08	g/cm³

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	40 to 50	°C
Drying time	8.0 to 12	hr
Recommended maximum moisture content	< 5.0E-3	%
Melt temperature	220 to 240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.