| About |
|---|
| Ingeo biopolymer 6362D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin derived from annually renewable resources. Available in pellet form, 6362D is a higher melt flow resin designed for specialty fiber products where an amorphous structure is desired. Ingeo biopolymer 6362D can be converted into a broad range of fiber products. Potential applications for Ingeo biopolymer 6362D include: Low melt binder fibers/sheath Low melt coatings Dissolvable / sacrificial fiber components&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Negative |
| Features | High liquidity,Renewable resources,Food contact compliance,Compostable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Glass transition temperature | 55.0 to 60.0 | ℃ | ASTM D3417 |
| Crystallization peak temperature | |||
| DSC | 125 to 135 | ℃ | ASTM D3418 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Denier per Filament | 1.00 to 2.00 | dpf | |
| Fabric Weight | Various |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 210℃，2.16kg | 70 to 85 | g/10min | ASTM D1238 |
| Relative viscosity | |||
| 30℃ | 2.50 | ||
| Melt density | |||
| 230℃ | 1.08 | g/cm³ |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 40 | °C | |
| Drying time | 8.0 to 12 | hr | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. g/9000m |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |