| About |
|---|
| InnoPlus HD8100M is a natural color-high density polyethylene pipe grade which is certified as PE 100. InnoPlus HD8100M is bimodal resins exhibit excellent creep resistance and chemical resistance properties. This grade is suitable for high quality pressure pipes, produced by conventional pipe extrusion process. Typical Application : High pressure and High temperature pipes; Drinking water pipes, Industrial pipes and Sewer pipes.&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Food contact compliance,High density,Solvent resistance,Bimodal molecular weight distribution |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 0.25 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 25% non-ionic surfactant, F50 | > 1000 | hr | ASTM D1693B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 470 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 124 | ℃ | ASTM D1525 3 |
| Melting peak temperature | 128 | ℃ | ASTM D3418 |
| Oxygen sensing time | |||
| 200℃ | > 40 | min | ISO 11357-6 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 64 | ASTM D2240 | |
| tensile strength | ISO 527-2 | ||
| yield | 25.0 | MPa | ISO 527-2 |
| fracture | 33.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 750 | % | ISO 527-2 |
| Bending modulus | |||
| 23℃ | 735 | MPa | ASTM D747 |
| Bending modulus | 1080 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 180 to 200 | °C | |
| Barrel 3 zone temperature | 180 to 200 | °C | |
| Barrel 5 zone temperature | 180 to 200 | °C | |
| Nozzle temperature | 190 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Non break |
| 3. Rate A (50°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |