InnoPlus LL9630U

About
InnoPlus LL9630U resin is a hexene co-polymer based linear low density polyethylene designed for rotational molding applications. This grade is UV8 resistance level pelletized rotational molding resin with high stiffness and an excellent balance of processability and environmental stress cracking resistance. Typical Applications : InnoPlus LL9630U can be used to produce variety applications such as general molding, toys & playground equipments, storage containers, medium to large water tanks and chemical tanks.&&

About

InnoPlus LL9630U resin is a hexene co-polymer based linear low density polyethylene designed for rotational molding applications. This grade is UV8 resistance level pelletized rotational molding resin with high stiffness and an excellent balance of processability and environmental stress cracking resistance. Typical Applications : InnoPlus LL9630U can be used to produce variety applications such as general molding, toys & playground equipments, storage containers, medium to large water tanks and chemical tanks.&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Low density,Copolymer,Hexene copolymers
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	3.2	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, molded, F50	> 1000	hr	ASTM D1693A

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	118	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, molded	60		ASTM D2240
tensile strength
Yield, molding	20.0	MPa
Fracture, molded	30.0	MPa
Tensile strain
Fracture, molded	1000	%	ASTM D638
Bending modulus
Compression Molding	750	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.