| About |
|---|
| Characteristics: High molecular weight High thermal resistance and mechanical strength Process: Extrusion plates Applications: Disposables Disposables trays Bioriented films (BOPS) Mixture with HIPS in sheet extrusion Shower cabin panels&& |
| Product Description | |
|---|---|
| Generic | PS (GPPS) |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Food contact compliance,High molecular weight,Disposable,HB |
| Availabilitys | Latin America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ASTM D792 , ISO 1183 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 2.0 | g/10min | ASTM D1238，ISO 1133 |
| Shrinkage rate | |||
| MD | 0.30 to 0.60 | % | ASTM D955 |
| — | 0.30 to 0.60 | % | ISO 294-4 |
| Water absorption rate | |||
| saturated | < 0.10 | % | ASTM D570 |
| Saturation, 23 ℃ | < 0.10 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 23 | J/m | ASTM D256 |
| 23℃ | 2.2 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 95.0 | ℃ | ASTM D648，ISO 75-2/A |
| Vicat Softening Temp | |||
| A50 | 106 | ℃ | ASTM D1525，ISO 306 |
| B50 | 101 | ℃ | ASTM D1525 5 , ISO 306/B50 5 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-level | 80 | ASTM D785 | |
| M-level | 80 | ISO 2039-2 | |
| Tensile modulus | |||
| 23℃ | 3300 | MPa | ASTM D638 , ISO 527-2 |
| tensile strength | |||
| Fracture, 23 ℃ | 57.0 | MPa | ASTM D638 |
| Fracture, 23 ℃ | 55.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 2.5 | % | ASTM D638 , ISO 527-2 |
| bending strength | |||
| 23℃ | 95.0 | MPa | ASTM D790 , ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Processing (melt) temperature | 220 to 260 | °C | |
| Mold temperature | 50 to 75 | °C | |
| Melt temperature | 210 to 240 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |