| About |
|---|
| INSPIRE 147 高性能聚合物用于片材挤出和热成型加工。它适宜用于产能较高的热成型加工线，这种应用要求注塑周期短以及尺寸稳定性。INSPIRE 147具有较好的机械/光学性能，以及抗静电性能和感官性能。 应用领域： 自动售卖机用杯子和奶制品罐 饼干、水果和各种食品的托盘 泡罩包装 符合以下法规： European Commission Regulation (EU) No 10/2011 美国食品和药物管理局法规 21 CFR 177.1520(c) 1.1 请查询法规以获取完备的细节资料。&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.2 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, injection molding | 35.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Yield, injection molding | 11 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 1600 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23 ℃, injection molding | 5.5 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 121 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | 157 | ℃ | ISO 306/A |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| Injection molded film | 35 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |