INSTRUC PFAGF20

About
20% GLASS FIBER REINFORCED PERFLUOROALKOXY&&

Product Description
Generic	PFA
Material Status	Commercial: Active
Features	V-0
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.21	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.40 to 0.60	%
Water absorption rate
24hr	0.035	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	41.4	MPa	ASTM D638
Tensile strain
yield	4.0 to 6.0	%	ASTM D638
Bending modulus	4480	MPa	ASTM D790
bending strength	72.4	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	320	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	149	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	V-0

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	121	°C
Drying time	2.0 to 4.0	hr
Processing (melt) temperature	343 to 399	°C
Mold temperature	121 to 232	°C
Back pressure	0.345 to 0.689	MPa
Screw speed	40 to 70	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.