INSULCAST® RTVS 51

About
RTVS 51 is a low temperature flexible, easily pourable methyl phenyl RTV Silicone sealant/encapsulant. The RTVS 51 can be used with a wide variety of curing agents, thus varying pot life, cure time, mix ratios and cure conditions (See RTVS Catalyst Selector Guide).&&

Product Description
Generic硅橡胶,RTV-2
Material StatusCommercial: Active
FeaturesLow temperature toughness
AvailabilitysNorth America

Technical Data
MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A50 ASTM D2240

elastic bodyNominal valueUnitTest method
tensile strength2.62MPaASTM D412
Tensile strain
fracture170%ASTM D412
tear strength4.38kN/mASTM D624

Electrical performanceNominal valueUnitTest method
Volume resistivity2.0E+14ohms·cmASTM D257
Dielectric strength20kV/mmASTM D149
Dielectric constant
1 kHz3.60 ASTM D150
Dissipation factor
1 kHz5.0E-3 ASTM D150

Supplementary informationNominal valueUnitTest method
Mixing ratio
by weight0.10 to 0.50%

Uncured PropertiesNominal valueUnitTest method
colourWhite 
Density1.25g/cm³
viscosity12Pa·sASTM D2393
storage stability
25 ℃15 to 120min

Cured PropertiesNominal valueUnitTest method
Linear Shrinkage0.20 to 0.60%

THERMALNominal valueUnitTest method
Linear coefficient of thermal expansion
MD2.2E-41/℃
Thermal conductivity coefficient0.31W/m/K
Operating temperature-115 to 232
Storage period
25℃26wk

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die B
3. w/CAT-2
4. varies w/% of CAT 2
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.