Integra™ ABS 6030 GP

About
General Purpose, High Flow ABS&&

Product Description
Generic	ABS
Material Status	Commercial: Active
Features	High liquidity
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D792
Melt Flow Rate
220℃，10.0kg	30	g/10min	ASTM D1238
Shrinkage rate
MD	0.50 to 0.80	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，6.4mm	210	J/m	ASTM D256

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed, 6.35 mm	93.9	℃
1.8 MPa, unannealed, 6.35 mm	86.1	℃

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-grade, 23 ℃, 6.35 mm	112		ASTM D785
tensile strength
Yield, 23 ℃	47.1	MPa	ASTM D638
Bending modulus
23℃	2250	MPa	ASTM D790
bending strength
Yield, 23 ℃	65.7	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 85	°C
Drying time	2.0 to 5.0	hr
Processing (melt) temperature	180 to 240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.