| About |
|---|
| Product Description | |
|---|---|
| Supplier | INVISTA |
| Generic | PA66 |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Good color stability,V-2 |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD：2.0 mm | 1.7 | % | ISO 294-4 |
| MD：2.0 mm | 0.8 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2950 | MPa | ISO 527 |
| tensile strength | |||
| yield | 82 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | 20 | % | ISO 527-2 |
| yield | 4.4 | % | ISO 527-2 |
| Bending modulus | 3000 | MPa | ISO 178 |
| bending strength | 98 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30℃ | kJ/m² | ISO 179 | |
| 23℃ | 4.2 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | ISO 179 | ||
| -30℃ | kJ/m² | ISO 179 | |
| 23℃ | No Break | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 69 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 197 | ℃ | ISO 75-2/B |
| Melting temperature | 263 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 80 | °C | null |
| Drying time | 3.0 to 6.0 | hr | null |
| Temperature at the rear of the barrel | 250 to 270 | °C | null |
| Temperature in the middle of the barrel | 270 to 290 | °C | null |
| Front temperature of material barrel | 270 to 290 | °C | null |
| Nozzle temperature | 270 to 290 | °C | null |
| Processing (melt) temperature | 280 to 295 | °C | null |
| Mold temperature | 50 to 90 | °C | null |
| Back pressure | 0.200 to 1.00 | MPa | null |
| Screw speed | 75 to 180 | rpm | null |
| cushion | 4.00 to 6.00 | mm | null |
| Exhaust hole depth | 0.007 to 0.040 | mm | null |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |