IPC PP 4810C-T

About
IPC PP 4810C-T是一种聚丙烯共聚物(PP Copoly)材料,含有的填充物为10% 滑石填料。该产品在北美洲有供货,。 IPC PP 4810C-T的主要特性为:共聚物。&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Copolymer
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.970	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	10	g/10min	ASTM D1238
Shrinkage rate
MD	1.6 to 2.0	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	24.1	MPa	ASTM D638
Bending modulus	1520	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	64	J/m	ASTM D256-A

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.