IPC PP 4830H-MLGF8-R2-UV

About
IPC PP 4830H-MLGF8-R2-UV是一种聚丙烯材料,含有的填充物为32% 玻璃矿物。该产品在北美洲有供货,。&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.17	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238
Shrinkage rate
MD	0.55	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	31.0	MPa	ASTM D638
Tensile strain
yield	5.0	%	ASTM D638
Bending modulus	3450	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	37	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	145	℃
1.8 MPa, unannealed	99.4	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.