| About |
|---|
| Product Description | |
|---|---|
| Supplier | Huntsman |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good flexibility,Good wear resistance,Low temperature toughness |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | |
| Shrinkage rate | |||
| MD | 0.7 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 95 | ASTM D2240 | |
| Shaw’s D | 52 | ASTM D2240 | |
| tensile strength | 62 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 460 | % | DIN 53504 |
| Tensile modulus | |||
| 100% | 12 | MPa | DIN 53504 |
| 300% | 35 | MPa | DIN 53504 |
| tear strength | 101 | kN/m | DIN 53515 |
| abrasion | 30 | mm3 | DIN 53516 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 30 | % | ASTM D395 |
| 70℃，22 hr | 82 | % | ASTM D395 |
| Basho’s elasticity | 35 | % | ASTM D2632 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| TMA | |||
| Low | 175 | ℃ | Huntsman |
| High | 187 | ℃ | Huntsman |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |