IROSTIC® S 6440

About
IROSTIC® is the Huntsman trade name for a range of polyurethane based raw materials for the manufacture of TPU adhesives. IROSTIC® is globally available in a broad range of base polyol and isocyanate chemistries and can be used as a one or two-component system with IRODUR® cross-linkers. IROSTIC® “Footwear Adhesives” features: Very good heat resistance Good adhesion to various substrates Good green strength May be used as one or two component adhesives High tear resistance Good hydrolysis resistance Low temperature flexibility High peel strength IROSTIC® “Adhesives” applications: Footwear Laminating Adhesives Do It Yourself Textiles Print industry Bonding of woven / non-woven fabrics Athletic shoes and sporting goods Packaging materials Aerospace and automotive assemblies&&

About

IROSTIC® is the Huntsman trade name for a range of polyurethane based raw materials for the manufacture of TPU adhesives. IROSTIC® is globally available in a broad range of base polyol and isocyanate chemistries and can be used as a one or two-component system with IRODUR® cross-linkers. IROSTIC® “Footwear Adhesives” features: Very good heat resistance Good adhesion to various substrates Good green strength May be used as one or two component adhesives High tear resistance Good hydrolysis resistance Low temperature flexibility High peel strength IROSTIC® “Adhesives” applications: Footwear Laminating Adhesives Do It Yourself Textiles Print industry Bonding of woven / non-woven fabrics Athletic shoes and sporting goods Packaging materials Aerospace and automotive assemblies&&

Product Description
Supplier	Huntsman
Generic	TPU
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
viscosity
15% solid in MEK, 20 ℃	0.400 to 1.60	Pa·s

elastic body	Nominal value	Unit
tensile strength
fracture	21.0 to 26.0	MPa
yield	3.00 to 4.00	MPa
Tensile strain
fracture	1500 to 1700	%

MECHANICAL	Nominal value	Test method
Shore hardness		DIN 53505
Shaw’s A	87 to 91	DIN 53505
Shaw’s D	43 to 44	DIN 53505

Supplementary information	Nominal value	Unit	Test method
Activation temperature	40 to 45	℃
Crystallization rate	12.0 to 16.0	min	Internal Method
Flowability	135 to 164	℃	ASTM 28
Processing temperature	170 to 190	℃
SAFT	105 to 148	℃	Internal Method

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.