| About |
|---|
| Isocor™ 637 multi-polymer is a linear polyamide with unique solubility characteristics and physical properties. Unlike conventional polyamides, Isocor™ 637 is soluble in common alcohols or in alcohol / water mixtures. Isocor™ 637 is easily processed and has a wide range of applications due to its physical properties, chemical resistance, and lower melt temperatures. Typical applications for Isocor™ 637 include: thread bonding specialty coatings pigment carriers specialty adhesives polymer additives&& |
| Product Description | |
|---|---|
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Solvent resistance |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.07 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 3.5 | % | ASTM D570 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 145 | ℃ | DSC |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 62 | ASTM D2240 | |
| tensile strength | |||
| yield | 47.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 360 | % | ASTM D638 |
| Bending modulus | 179 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Dew Point | < -18 | °C | |
| Recommended maximum moisture content | 0.20 | % | |
| Hopper temperature | 60 | °C | |
| Barrel rear temperature | 143 to 154 | °C | |
| Barrel middle temperature | 149 to 160 | °C | |
| Barrel front temperature | 154 to 166 | °C | |
| Nozzle temperature | 143 to 154 | °C | |
| Processing (melt) temperature | 143 to 154 | °C | |
| Mold temperature | 10 to 93 | °C | |
| Injection pressure | 3.45 to 13.8 | MPa | |
| Recommended maximum moisture content | 0.10 | % | |
| Barrel temperature | 79 | °C | |
| Barrel 1 zone temperature | 218 | °C | |
| Barrel 2 zone temperature | 246 | °C | |
| Barrel 3 zone temperature | 246 | °C | |
| Barrel 4 zone temperature | 246 | °C | |
| Nozzle temperature | 229 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |