Isocor™ HW29TL

About
Isocor™ HW29TL is a ultra low viscosity PA-610 with excellent melt flow characteristics. Isocor™ HW29TL is specifically formulated for thin wall or high speed injection molding applications. This resin is suitable for applications requiring low moisture absorption and greater dimensional stability. This resin can be processed using conventional techniques. Typical applications for Isocor™ HW29TL include: thin-wall injection molding electrical connectors small parts-high output&&

About

Isocor™ HW29TL is a ultra low viscosity PA-610 with excellent melt flow characteristics. Isocor™ HW29TL is specifically formulated for thin wall or high speed injection molding applications. This resin is suitable for applications requiring low moisture absorption and greater dimensional stability. This resin can be processed using conventional techniques. Typical applications for Isocor™ HW29TL include: thin-wall injection molding electrical connectors small parts-high output&&

Product Description
Generic	PA610
Material Status	Commercial: Active
Features	Good Dimensional Stability,Low Viscosity,Low moisture absorption
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data

Process Conditions
injection	Nominal value	Unit	Test method
Dew Point	< -18	°C
Recommended maximum moisture content	0.20	%
Hopper temperature	79	°C
Barrel rear temperature	221 to 243	°C
Barrel middle temperature	227 to 260	°C
Barrel front temperature	238 to 271	°C
Nozzle temperature	238 to 271	°C
Processing (melt) temperature	238 to 271	°C
Mold temperature	10 to 93	°C
Injection pressure	3.45 to 13.8	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.