| About |
|---|
| Type: Isoplast® 101 LGF 60 Natural is an engineering thermoplastic polyurethane resin.&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | E-TPU |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.71 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.10 to 0.30 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 17000 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 227 | MPa | ASTM D638 |
| fracture | 227 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 2.0 | % | ASTM D638 |
| fracture | 2.0 | % | ASTM D638 |
| Bending modulus | 15000 | MPa | ASTM D790 |
| bending strength | 393 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃，3.2mm | 850 | J/m | ASTM D256 |
| 23℃，3.2mm | 850 | J/m | ASTM D256 |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| -29℃ | 25.0 | J | ASTM D3763 |
| 23℃ | 29.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 1.8 MPa, unannealed | 127 | ℃ | ASTM D648 |
| 1.8 MPa, annealed | 127 | ℃ | ASTM D648 |
| Vicat Softening Temp | 186 | ℃ | ASTM D1525 |
| Linear coefficient of thermal expansion | |||
| MD | 1.1E-5 | 1/℃ | ASTM D696 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 to 100 | °C | |
| Processing (melt) temperature | 240 to 260 | °C | |
| Mold temperature | 65 to 90 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |