| About |
|---|
| ISOTHANE® G Series products are high performance environment-friendly TPU based on renewable materials with various bio-based content. They exhibit excellent transparency, mechanical properties, abrasive resistance and solvent resistance. ISOTHANE® G series can be processed by extrusion and/or injection molding. |
| Product Description | |
|---|---|
| Supplier | Great Eastern |
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | Good Clarity,Renewable resources,Good wear resistance,Solvent resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ASTM D792 |
| Biomass content | 28.0 | ASTM D6866 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 75 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress | |||
| 50% strain | 4.00 | MPa | |
| 100% strain | 5.00 | MPa | |
| 300% strain | 8.00 | MPa | |
| Tensile strength | 19.0 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 900 | % | ASTM D412 |
| tear strength | 110 | kN/m | ASTM D624 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |