ISPLEN® PB 140 G2M

About
ISPLEN® PB 140 G2M is a heterophasic copolymer with medium-low fluidity designed for injection moulding applications where very high impact properties, even at low temperatures, is necessary combined with good procesability. Among other technical advantages, ISPLEN® PB 140 G2M offers: Production of items exposed to heavy loads that needs high toughness. Good flow properties enable to fill complex moulds. TYPICAL APPLICATIONS Due to its excellent balance of properties some of the major applications of ISPLEN® PB 140 G2M are consumer goods as industrial handling or packaging containers, housewares and indoor furniture, suitcases and boxes with living hinge (i.e. tool boxes). Also is suitable for technical components: toys, sports equipment, leisure goods, automotive, pallets, crates and pails. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.&&

About

ISPLEN® PB 140 G2M is a heterophasic copolymer with medium-low fluidity designed for injection moulding applications where very high impact properties, even at low temperatures, is necessary combined with good procesability. Among other technical advantages, ISPLEN® PB 140 G2M offers: Production of items exposed to heavy loads that needs high toughness. Good flow properties enable to fill complex moulds. TYPICAL APPLICATIONS Due to its excellent balance of properties some of the major applications of ISPLEN® PB 140 G2M are consumer goods as industrial handling or packaging containers, housewares and indoor furniture, suitcases and boxes with living hinge (i.e. tool boxes). Also is suitable for technical components: toys, sports equipment, leisure goods, automotive, pallets, crates and pails. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Food contact compliance,Ultra high toughness,Moderate liquidity,low-temperature impact resistance
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	3.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ISO 868
Bending modulus	1100	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	12	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	74.0	℃	ISO 75-2/B

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 250	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.