ISPLEN® PP 070 G2M

About
ISPLEN® PP 070 G2M is a polypropylene homopolymer with a medium fluidity intended for injection moulding. It is characterised by good flow properties that enables to fill the mould easier. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 070 G2M is widely used for the production of consumer goods such us: Food containers and rigid packaging. Toys and small appliances. Caps and closures. Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.&&

About

ISPLEN® PP 070 G2M is a polypropylene homopolymer with a medium fluidity intended for injection moulding. It is characterised by good flow properties that enables to fill the mould easier. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 070 G2M is widely used for the production of consumer goods such us: Food containers and rigid packaging. Toys and small appliances. Caps and closures. Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good liquidity,Food contact compliance,Moderate liquidity,Solvent resistance,Good coloring
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	12	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	2.5	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	68		ISO 868
Bending modulus	1550	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	210 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.