ISPLEN® PP 099 K2M

About
ISPLEN® PP 099 K2M is a high fluidity nucleated polypropylene homopolymer designed for injection moulding applications. It is characterised by its excellent processability which allows for quick, easy filling of moulds and ultra short cycles. Moreover, because of its special crystalline configuration, it has high stiffness and very low warpage. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. ISPLEN® PP 099 K2M is formulated with an antistatic additive package to permit the dispersion of static charges accumulated on the article surface avoiding anti-aesthetic dust deposits during storage or exhibition. Additive package also facilitates material processing and makes it easier to extract the pieces from the mould. TYPICAL APPLICATIONS ISPLEN® PP 099 K2M is widely used for the production of consumer goods such us: Rigid packaging with very thin walls. Video boxes. Screw caps and closures. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.&&

About

ISPLEN® PP 099 K2M is a high fluidity nucleated polypropylene homopolymer designed for injection moulding applications. It is characterised by its excellent processability which allows for quick, easy filling of moulds and ultra short cycles. Moreover, because of its special crystalline configuration, it has high stiffness and very low warpage. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. ISPLEN® PP 099 K2M is formulated with an antistatic additive package to permit the dispersion of static charges accumulated on the article surface avoiding anti-aesthetic dust deposits during storage or exhibition. Additive package also facilitates material processing and makes it easier to extract the pieces from the mould. TYPICAL APPLICATIONS ISPLEN® PP 099 K2M is widely used for the production of consumer goods such us: Rigid packaging with very thin walls. Video boxes. Screw caps and closures. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,High liquidity,Crystal,Nucleation,Quick molding cycle,Food contact compliance,Solvent resistance,Antistatic property,Good coloring
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	55	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	76		ISO 868
Bending modulus	1800	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	2.5	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	97.0	℃	ISO 75-2/B

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.